| Message ID | 20230211092152.949442-1-felix.moessbauer@siemens.com |
|---|---|
| Headers | show |
| Series | Add BSP for StarFiveTech VisionFive2 Risc-V board | expand |
On 11.02.23 10:21, Felix Moessbauer wrote: > Changes since v1: > > - rebased onto next (including bitbake 2.0 migration) > - exclude opensbi memory range in u-boot DT > - use upstream OpenSBI version (instead of StarFive version) > > This series adds a new machine "starfive-visionfive2" which is a > Risc-V board based on the JH7110 SoC. The BSP is modeled based on the > buildroot SDK [1], but without any proprietary imaging components. > > Further, we implement the fit + efi boot toolchain, instead of the > proposed ubootenv + fit version. This also requires that we embed the > board's linux device tree into the fit, as memory and reserved-memory > nodes are resolved via the efi API (implemented by u-boot) instead of > resolving them via the DT in Linux. > > As the JH7110 SoC has no usable upstream support yet, we directly > build the 5.15 based kernel from the SDK, instead of porting patches > on top of the standard Linux. Distro kernels are also not supported. > > Note: This series requires the following patch, which is NOT included: > "fix cyclic dep on crossbuild-essential-riscv64" > > Best regards, > Felix Moessbauer > Siemens AG I tested this series today. The isar-image-base target build and booted just fine. Best, Tobias > Felix Moessbauer (7): > u-boot: inject debian multi-arch config > starfive-visionfive2: package u-boot > starfive-visionfive2: package opensbi firmware > starfive-visionfive2: add BSP kernel > starfive-visionfive2: create u-boot-spl firmware > starfive-visionfive2: create u-boot-spl FIT image > starfive-visionfive2: add machine > > meta-isar/conf/local.conf.sample | 1 + > .../conf/machine/starfive-visionfive2.conf | 29 ++++++ > .../starfive-visionfive2-sid-ports.conf | 7 ++ > .../jh7110-u-boot-spl-image/files/install | 1 + > .../jh7110-u-boot-spl-image/files/rules | 13 +++ > .../jh7110-u-boot-spl-image_0.1.bb | 30 +++++++ > .../jh7110-u-boot-spl-tool_0.1.bb | 23 +++++ > .../files/starfive-visionfive2-rules.tmpl | 17 ++++ > ...ensbi-starfive-visionfive2_1.2+20230107.bb | 31 +++++++ > ...x-offset-of-env-data-block-on-jh7110.patch | 30 +++++++ > ...iscv-Fix-build-against-binutils-2.38.patch | 55 ++++++++++++ > ...-opensbi-memory-range-in-device-tree.patch | 40 +++++++++ > ...upport-building-double-float-modules.patch | 89 +++++++++++++++++++ > ...five-visionfive2_2022.01-rc4+VF2-v2.8.0.bb | 38 ++++++++ > .../files/rules.tmpl | 12 +++ > .../files/visionfive2-u-boot-firmware.install | 1 + > .../visionfive2-uboot-fit-image.its.tmpl | 41 +++++++++ > .../visionfive2-u-boot-firmware.bb | 36 ++++++++ > ...or-unrecognized-opcode-csrr-a5-0xc01.patch | 26 ++++++ > .../linux/files/starfive2_extra.cfg | 3 + > .../linux/linux-starfive_5.15-visionfive2.bb | 18 ++++ > .../canned-wks/starfive-visionfive2.wks.in | 23 +++++ > .../u-boot/files/debian/rules.tmpl | 9 ++ > 23 files changed, 573 insertions(+) > create mode 100644 meta-isar/conf/machine/starfive-visionfive2.conf > create mode 100644 meta-isar/conf/multiconfig/starfive-visionfive2-sid-ports.conf > create mode 100644 meta-isar/recipes-bsp/jh7110-u-boot-spl-image/files/install > create mode 100644 meta-isar/recipes-bsp/jh7110-u-boot-spl-image/files/rules > create mode 100644 meta-isar/recipes-bsp/jh7110-u-boot-spl-image/jh7110-u-boot-spl-image_0.1.bb > create mode 100644 meta-isar/recipes-bsp/jh7110-u-boot-spl-tool/jh7110-u-boot-spl-tool_0.1.bb > create mode 100644 meta-isar/recipes-bsp/opensbi/files/starfive-visionfive2-rules.tmpl > create mode 100644 meta-isar/recipes-bsp/opensbi/opensbi-starfive-visionfive2_1.2+20230107.bb > create mode 100644 meta-isar/recipes-bsp/u-boot/files/starfive-visionfive2/0001-fix-offset-of-env-data-block-on-jh7110.patch > create mode 100644 meta-isar/recipes-bsp/u-boot/files/starfive-visionfive2/0001-riscv-Fix-build-against-binutils-2.38.patch > create mode 100644 meta-isar/recipes-bsp/u-boot/files/starfive-visionfive2/0002-exclude-opensbi-memory-range-in-device-tree.patch > create mode 100644 meta-isar/recipes-bsp/u-boot/files/starfive-visionfive2/0002-riscv-support-building-double-float-modules.patch > create mode 100644 meta-isar/recipes-bsp/u-boot/u-boot-starfive-visionfive2_2022.01-rc4+VF2-v2.8.0.bb > create mode 100644 meta-isar/recipes-bsp/visionfive2-u-boot-firmware/files/rules.tmpl > create mode 100644 meta-isar/recipes-bsp/visionfive2-u-boot-firmware/files/visionfive2-u-boot-firmware.install > create mode 100644 meta-isar/recipes-bsp/visionfive2-u-boot-firmware/files/visionfive2-uboot-fit-image.its.tmpl > create mode 100644 meta-isar/recipes-bsp/visionfive2-u-boot-firmware/visionfive2-u-boot-firmware.bb > create mode 100644 meta-isar/recipes-kernel/linux/files/fix-Error-unrecognized-opcode-csrr-a5-0xc01.patch > create mode 100644 meta-isar/recipes-kernel/linux/files/starfive2_extra.cfg > create mode 100644 meta-isar/recipes-kernel/linux/linux-starfive_5.15-visionfive2.bb > create mode 100644 meta-isar/scripts/lib/wic/canned-wks/starfive-visionfive2.wks.in >